Outstanding performance thanks to optimized architecture
Provides an 8U space for 10 server blades and optimized layout for fan modules, PSUs, •
switch modules, and management modules, which achieves a good balance between
computing density and power consumption and maximizes space utilization.
Supports server blades such as the BH620 V2, BH621 V2, BH622 V2, and BH640 •
V2 that use Intel
®
Xeon
®
E5 series processors, which meets low-end, mid-range,
and high-end customer requirements.
Supports up to six switch modules, such as GE switch modules, 10GE switch •
modules, FC switch modules, or pass through modules.
High efciency and energy-saving
Uses highly efcient AC or DC PSUs to centrally supply 12 V DC power, achieving •
up to 92% power efciency and reducing losses from power conversion.
Supports energy-saving technologies, such as power capping, power alternate •
hibernation, and intelligent fan speed adjustment by area.
Adopts dedicated system air ducts and an area-based thermal design to improve •
cooling efciency.
Adopts a fully redundant architecture, supporting load balancing and seamless •
failover.
Uses a passive backplane to prevent single point of failures, ensuring high reliability •
and stable service running.
Easy maintenance and management
Complies with IPMI V2.0 and provides functions such hardware monitoring, alarm •
generation, and log recording and querying.
Supports SOL, KVM over IP, WebUI, and virtual media. •
Supports a variety of protocols including the SNMP v3, SNMP Trap v1, SSL, SSH, •
RMCP, and RMCP+.
Uses Zero Touch–based remote maintenance for startup, shutdown, and reset to •
reduce O&M costs.
The E6000H chassis adopts the optimized layout and
space design from the E6000 chassis, and uses a
high-speed and passive backplane to support 8G FC
or 10GE switching, making it an excellent choice for
high-density and clustered deployment scenarios. The
E6000H chassis can be installed in a standard 19-inch
rack at a depth of at least 1000 mm. Two types of
E6000H chassis are provided: AC and DC.
Form factor 8U blade server chassis
Server blades 10 slots for HUAWEI BH series server blades
Switch module
Up to 6 switch modules:
NX910 GE pass through module•
NX120 4G FC switch module•
NX220 8G FC switch module•
NX226 8G FC pass through module•
NX112 10GE uplink switch module•
NX113 10GE uplink switch module•
NX230 10GE switch module•
PSU
Up to 6 hot-swappable PSUs:
AC: 1600 W •
–48 V DC: 1300 W•
Redundancy: N+N* or N+M
Fan module 9 hot-swappable fan modules in N+1 redundancy mode
Management
2 management modules in 1+1 redundancy mode
Supported protocols: IPMI 2.0, SOL, SSL, and SSH
Supports CLI, IPMITools, RMCP+, and Web for management
Power supply 110 V/220 V AC or –48 V DC
Operating temperature 5ºC to 35ºC
Dimensions
Height: 353 mm (13.90 in.)
Width: 447 mm (17.60 in.)
Depth: 810 mm (31.89 in.)
Technical Specications
HUAWEI Tecal E6000H Blade Server Chassis
(E6000H chassis)
*Note: N+N redundancy is not supported on PSUs when the server is fully congured with BH640 V2 server blades.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce